5000 w transient voltage suppressor www. microsemi . com scottsdale division 5kp5.0 thru 5kp110ca, e3 5kp5.0 ? 5kp110ca, e3 description appearance these microsemi 5 kw transient voltage suppressors (tvss) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per iec61000-4-5 and classe s with various source impedances described herein. this series is available in 5.0 to 110 volt standoff voltages (v wm ) in both unidirectional and bidirectional offered in two different package designs for axial and radial configurations. microsemi also offers numerous other tvs products to meet higher and lower power demands and special applications. case 5a (do-204ar) case 5r important: for the most current data, consult microsemi?s website: http://www.microsemi.c o m features applications / benefits ? available in both unidirectional and bidirectional construction (bidirectional with c or ca suffix) ? available in both axial-leaded and radial packages (include r prefix in part number for radial package option shown in figure as ?case 5r,? e.g. r5kp5.0a) ? selections for 5.0 to 110 volts standoff voltages (v wm ) ? suppresses transients up to 5000 watts @ 10/1000 s and 34,000 watts @ 8/20 s (see figure 1) ? optional 100% screening for avionics grade is available by adding ma prefix to part number for added 100% temperature cycle -55 o c to +125 o c (10x) as well as surge (3x) and 24 hours htrb with post test v z & i r (in the operating direction for unidirectional or both directions for bidirectional) ? options for screening in accordance with mil-prf- 19500 for jan, jantx, jantxv, and jans are also available by adding mq, mx, mv, or msp prefixes respectively to part numbers. ? moisture classification is level 1 with no dry pack required per ipc/jedec j-std-020b ? rohs compliant devices available by adding ?e3? suffix ? protection from switching transients and induced rf ? fast response ? protection from esd, and eft per iec 61000-4-2 and iec 61000-4-4 ? secondary lightning protection per iec61000-4-5 with 42 ohms source impedance: class 1,2,3,4: 5kp5.0a to 5kp110a or ca class 5: 5kp5.0a to 5kp110a or ca (short distance) class 5: 5kp5.0a to 5 kp36a or ca (long distance) ? secondary lightning protection per iec61000-4-5 with 12 ohms source impedance: class 1 & 2: 5kp5.0a to 5kp110a or ca class 3: 5kp5.0a to 5kp78a or ca class 4: 5kp5.0a to 5kp40a or ca ? secondary lightning protection per iec61000-4-5 with 2 ohms source impedance: class 2: 5kp5.0a to 5kp70a or ca class 3: 5kp5.0 to 5kp36a or ca class 4: 5kp5.0 to 5kp18a or ca maximum ratings mechanical and packaging ? peak pulse power dissipation at 25 o c: 5000 watts at 10/1000 s (also see figures 1 and 2) ? impulse repetition rate (duty factor): 0.05% ? t clamping (0 volts to v (br) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional ? operating and storage temperature: -65 o c to +150 o c ? thermal resistance: 20 o c/w junction to lead, or 80 o c/w junction to ambient when mounted on fr4 pc board with 4 mm 2 copper pads (1oz) and track width 1 mm, length 25 mm ? steady-state power dissipation: 6 watts at t l = 30 o c, or 1.56 watts at t a = 25 o c when mounted on fr4 pc board described for thermal resistance ? forward surge voltage: 3.5 v maximum @ 100 amps 8.3 ms half-sine wave (unidirectional devices only) ? solder temperatures: 260 o c for 10 s (maximum) ? case: void-free transfer molded thermosetting epoxy body meeting ul94v-0 ? terminals: tin-lead or rohs compliant annealed matte-tin plating readily solderable per mil-std-750, method 2026 ? marking: body marked with part number ? polarity: band denotes cathode for the axial- leaded package and a dot denotes cathode terminal for the radial package. bidirectional not marked for polarity ? weight: 1.4 grams (approximate) ? tape & reel: standard per eia-296 for axial package (add ?tr? suffix to part number) ? see package dimensions on last page microsemi scottsdale division page 1 copyright ? 2006 3-10-2006 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
5000 w transient voltage suppressor www. microsemi . com scottsdale division 5kp5.0 thru 5kp110ca, e3 5kp5.0 ? 5kp110ca, e3 microsemi scottsdale division page 2 electrical characteristics microsemi part number (note 2) reverse stand-off voltage v wm (note 1) volts breakdown voltage v (br) v (br) @ i (br) volts ma maximum clamping voltage v c @ i pp volts maximum standby current i d @ v wm a maximum peak pulse current i pp (fig. 2) a maximum temperature coefficient of v (br) v(br ) mv/ oc 5kp5.0 5kp5.0a 5kp6.0 5kp6.0a 5.0 5.0 6.0 6.0 6.40 ? 7.30 6.40 ? 7.00 6.67 ? 8.15 6.67 ? 7.37 50 50 50 50 9.6 9.2 11.4 10.3 2000 * 2000 * 5000 5000 520 543 439 485 4.0 4.0 4.0 4.0 5kp6.5 5kp6.5a 5kp7.0 5kp7.0a 6.5 6.5 7.0 7.0 7.22 ? 8.82 7.22 ? 7.98 7.78 ? 9.51 7.78 ? 8.60 50 50 50 50 12.3 11.2 13.3 12.0 2000 2000 1000 1000 407 447 378 417 4.0 4.0 5.0 5.0 5kp7.5 5kp7.5a 5kp8.0 5kp8.0a 7.5 7.5 8.0 8.0 8.33 ? 10.2 8.33 ? 9.21 8.89 ? 10.9 8.89 ? 9.83 5 5 5 5 14.3 12.9 15.0 13.6 250 250 150 150 350 388 333 367 6.0 6.0 6.0 6.0 5kp8.5 5kp8.5a 5kp9.0 5kp9.0a 8.5 8.5 9.0 9.0 9.44 ? 11.5 9.44 ? 10.4 10.0 ? 12.2 10.0 ? 11.1 5 5 5 5 15.9 14.4 16.9 15.4 50 50 20 20 314 347 295 325 7.0 7.0 8.0 8.0 5kp10 5kp10a 5kp11 5kp11a 10 10 11 11 11.1 ? 13.6 11.1 ? 12.3 12.2 ? 14.9 12.2 ? 13.5 5 5 5 5 18.8 17.0 20.1 18.2 15 15 10 10 266 294 249 274 9.0 9.0 10 10 5kp12 5kp12a 5kp13 5kp13a 12 12 13 13 13.3 ? 16.3 13.3 ? 14.7 14.4 ? 17.6 14.4 ? 15.9 5 5 5 5 22.0 19.9 23.8 21.5 10 10 10 10 227 251 210 232 11 11 12 12 5kp14 5kp14a 5kp15 5kp15a 14 14 15 15 15.6 ? 19.1 15.6 ? 17.2 16.7 ? 20.4 16.7 ? 18.5 5 5 5 5 25.8 23.2 26.9 24.4 10 10 10 10 194 215 188 206 13 13 15 15 5kp16 5kp16a 5kp17 5kp17a 16 16 17 17 17.8 ? 21.8 17.8 ? 19.7 18.9 ? 23.1 18.9 ? 20.9 5 5 5 5 28.8 26.0 30.5 27.6 10 10 10 10 176 192 164 181 18 16 19 18 5kp18 5kp18a 5kp20 5kp20a 18 18 20 20 20.0 ? 24.4 20.0 ? 22.1 22.2 ? 27.1 22.2 ? 24.5 5 5 5 5 32.2 29.2 35.8 32.4 10 10 10 10 155 172 139 154 20 19 24 22 5kp22 5kp22a 5kp24 5kp24a 22 22 24 24 24.4 ? 29.8 24.4 ? 26.9 26.7 ? 32.6 26.7 ? 29.5 5 5 5 5 39.4 35.5 43.0 38.9 10 10 10 10 127 141 116 128 27 24 30 27 5kp26 5kp26a 5kp28 5kp28a 26 26 28 28 28.9 ? 35.3 28.9 ? 31.9 31.1 ? 38.0 31.1 ? 34.4 5 5 5 5 46.6 42.1 50.1 45.5 10 10 10 10 107 119 99 110 33 29 34 30 5kp30 5kp30a 5kp33 5kp33a 30 30 33 33 33.3 ? 40.7 33.3 ? 36.8 36.7 ? 44.9 36.7 ? 40.6 5 5 5 5 53.5 48.4 59.0 53.3 10 10 10 10 93 103 85 94 38 35 41 38 5kp36 5kp36a 5kp40 5kp40a 36 36 40 40 40.0 ? 48.9 40.0 ? 44.2 44.4 ? 54.3 44.4 ? 49.1 5 5 5 5 64.3 58.1 71.4 64.5 10 10 10 10 78 86 70 78 45 40 50 45 5kp43 5kp43a 5kp45 5kp45a 43 43 45 45 47.8 ? 58.4 47.8 ? 52.8 50.0 ? 61.1 50.0 ? 55.3 5 5 5 5 46.7 69.4 80.3 72.7 10 10 10 10 65 72 62 69 54 49 57 51 5kp48 5kp48a 5kp51 5kp51a 48 48 51 51 53.3 ? 65.1 53.3 ? 58.9 56.7 ? 69.3 56.7 ? 62.7 5 5 5 5 85.5 77.4 91.1 82.4 10 10 10 10 58 65 55 61 62 55 65 60 copyright ? 2006 3-10-2006 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
5000 w transient voltage suppressor www. microsemi . com scottsdale division 5kp5.0 thru 5kp110ca, e3 5kp5.0 ? 5kp110ca, e3 microsemi part number (note 2) reverse stand-off voltage v wm (note 1) volts breakdown voltage v (br) v (br) @ i (br) volts ma maximum clamping voltage v c @ i pp volts maximum standby current i d @ v wm a maximum peak pulse current i pp (fig. 2) a maximum temperature coefficient of v (br) v(br ) mv/ oc 5kp54 5kp54a 5kp58 5kp58a 54 54 58 58 60.0 ? 73.3 60.0 ? 66.3 64.4 ? 78.7 64.4 ? 71.2 5 5 5 5 96.3 87.1 103.0 93.6 10 10 10 10 52 57 49 53 70 64 77 69 5kp60 5kp60a 5kp64 5kp64a 60 60 64 64 66.7 ? 81.5 66.7 ? 73.7 71.1 ? 86.9 71.1 ? 78.6 5 5 5 5 107.0 96.8 114.0 103.0 10 10 10 10 47 52 44 49 79 70 85 75 5kp70 5kp70a 5kp75 5kp75a 70 70 75 75 77.8 ? 95.1 77.8 ? 86.0 83.3 ? 102.0 83.3 ? 92.1 5 5 5 5 125 113 134 121 10 10 10 10 40 44 37 41 93 84 100 90 5kp78 5kp78a 5kp85 5kp85a 78 78 85 85 86.7 ? 106.0 86.7 ? 95.8 94.4 ? 115.0 94.4 ? 104.0 5 5 5 5 139 126 151 137 10 10 10 10 36 40 33 36 104 94 113 102 5kp90 5kp90a 5kp100 5kp100a 90 90 100 100 100 ? 122 100 ? 111 111 ? 136 111 ? 123 5 5 5 5 160 146 179 162 10 10 10 10 31 34 28 31 120 109 134 122 5kp110 5kp110a 110 110 122 ? 149 122 - 135 5 5 196 177 10 10 26 28 147 132 note 1: transient voltage suppressors are normally selected with reverse ?stand off voltage? v wm which should be equal to or greater than the dc or continuous peak operating voltage level. note 2: for bidirectional construction, indicate a c or ca suffix after the part number. * for the 5kp5.0c and 5kp5.0ca double the i d maximum standby current to 4000 a symbols & definitions symbol definition symbol definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v (br) breakdown voltage i (br) breakdown current for v (br) i d standby current microsemi scottsdale division page 3 copyright ? 2006 3-10-2006 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
5000 w transient voltage suppressor www. microsemi . com scottsdale division 5kp5.0 thru 5kp110ca, e3 5kp5.0 ? 5kp110ca, e3 graphs p pp peak pulse power - kw tp ? pulse time ? sec test waveform parameters: tr=10 s, tp=1000 s figure 1 figure 2 peak pulse power vs. pulse time to 50% of pulse waveform exponentially decaying pulse package dimensions case 5a case 5r microsemi scottsdale division page 4 copyright ? 2006 3-10-2006 rev g v (br) breakdown voltage - volts figure 3 typical capacitance vs breakdown voltage note: dimensions are in inches. c ? capacitance ? pico farads 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|
